JennAir Wall Oven Code F2 E6: keypad circuit error on the display

What F2 E6 means

On JennAir built-in wall ovens, including the JJW9830DDP and JJW2830DS, F2 E6 is displayed when there may be a problem with the user interface or keypad, the control, or the wiring around them. It follows the same family as the other F2 interface alerts. The display shows F2 E6, and the oven may ignore your settings. The keypad may seem dead, or only some pads may work.

Common causes of F2 E6

Keypad or user interface that has failed
Poor connection between the interface and the control
Control not reading the interface signal

✓ One safe check you can try

1. Press Cancel and see whether the display clears. 2. Wipe the controls with a barely damp cloth, then dry them. 3. Turn the oven breaker off, count to sixty, and turn it on so the keypad circuit check starts fresh. 4. Restore power and try the clock. 5. Call us if F2 E6 is still on the display, and mention the keypad circuit.

! Why to stop there

Interface and control problems look the same from the front, so only testing separates them.
Forcing buttons or pressing hard can damage a touch surface that is only dirty.
Ordering a board without a test could mean paying twice.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

FC E8JennAir Wall Oven Code FC E8: Registration error FC E9JennAir Wall Oven Code FC E9: Wi-Fi power module wiring Feature Not AvailableJennAir Wall Oven Message "Feature Not Available": Follow the Prompt on the Display Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Wall Oven Display Flashing Time or 12:00: Set the clock after power loss Locked, Lock or LocJennAir Wall Oven Display Locked, Lock or Loc: Controls and door are locked Press Cancel to ResetJennAir Wall Oven Message "Press Cancel to Reset": Clear and power cycle Probe or Insert ProbeJennAir Wall Oven Display Probe or Insert Probe: Meat probe needed PUSH or PSHJennAir Wall Oven Display PUSH or PSH: Press start

F2 E6F2 E6 questions

What does the E6 add to F2?

JennAir lists it with the same interface or keypad description as the other F2 E codes. The final digit identifies which check the control made, which helps a technician.

Should I keep pressing the keys?

Gentle presses are fine, but repeated hard pressing will not help. A persistent code needs a technician to test the interface. Only the stored full code, with both digits, lets us match it to a test.

What does a repair cost?

We cannot name a price before testing, but we quote it in writing before any work and back the repair with a 30-day workmanship warranty.