Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent JennAir specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 766-5788 Request a Technician
Error code · Built-In Coffee System

JennAir Coffee System Message “GROUND TOO FINE ADJUST MILL INSERT WATER SPOUT”: Tank Removed or Air in Line

This longer message on JennAir RISE and NOIR built-in coffee systems, such as the JJB6424, appears when the water tank was removed during coffee runoff or there is air in the waterline. Put the tank back…

Low risk · DIY check OK
Request a Technician(713) 766-5788
Code
GROUND TOO FINE ADJUST MILL INSERT WATER SPOUT
Appliance
Built-In Coffee System
Brand
JennAir
Warranty
30-day workmanship

What GROUND TOO FINE ADJUST MILL INSERT WATER SPOUT means

This longer message on JennAir RISE and NOIR built-in coffee systems, such as the JJB6424, appears when the water tank was removed during coffee runoff or there is air in the waterline. Put the tank back and press OK. The display will show HOT WATER and dispense hot water, after which the system is ready for use again. Replace the tank and the system recovers by itself.

Common causes of GROUND TOO FINE ADJUST MILL INSERT WATER SPOUT

  • The water tank was removed during coffee runoff
  • Air is in the waterline
✓ One safe check you can try

1. Put the water tank back in place and push it in as far as it will go. 2. Press OK. 3. Wait while the display shows HOT WATER and the system dispenses hot water. 4. When it finishes, the system is ready. 5. If the message returns, call us.

! Why to stop there
  • Replacing the tank is all that is asked.
  • Pulling the tank during brewing can introduce air again.
  • Repeated returns point to the waterline and need inspection.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Built-In Coffee System codes

INSERT GROUNDS CONTAINERJennAir Coffee System Message "INSERT GROUNDS CONTAINER": Container Not Replaced INSERT MILK CONTAINER!JennAir Coffee System Message "INSERT MILK CONTAINER!": Milk Container Missing SELF DIAGNOSISJennAir Coffee System Message "SELF DIAGNOSIS": Automatic Startup Test ADD GROUND COFFEEJennAir Coffee System Message "ADD GROUND COFFEE": Funnel Is Empty CLOSE DOOR!JennAir Coffee System Message "CLOSE DOOR!": Service Door Is Open DESCALE!JennAir Coffee System Message "DESCALE!": Time to Remove Scale EMPTY GROUNDS CONTAINERJennAir Coffee System Message "EMPTY GROUNDS CONTAINER": Full of Used Grounds FILL BEANS CONTAINER!JennAir Coffee System Message "FILL BEANS CONTAINER!": Beans Ran Out
GROUND TOO FINE ADJUST MILL INSERT WATER SPOUTGROUND TOO FINE ADJUST MILL INSERT WATER SPOUT questions
What causes air in the line?

Removing the tank while coffee runs off can let air into the waterline, which is one reason this message shows. Seat it all the way in.

What will I see after pressing OK?

The display shows HOT WATER and hot water is dispensed. Afterward, the system is ready for use again. No other steps are needed. The cycle takes only a short while.

Will it happen again?

Leave the tank in place while a drink brews. If it keeps happening, call us and we will check the system with a written price first.

Book a visit

Still unsure about GROUND TOO FINE ADJUST MILL INSERT WATER SPOUT?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 766-5788
☎ Call the desk ▤ Request a Technician