JennAir Radiant Cooktop Code F13: Internal Touch Control Error

What F13 means

F13 on JennAir electric radiant and touch-control cooktops reports an internal communication error on the touch control module. The control's parts are not exchanging information properly. The cooktop may beep, ignore touches or refuse to start any element while F13 sits on the display. Your cookware is not involved. The cooktop stops responding to your touch until the link returns.

Common causes of F13

A communication glitch inside the touch control module
A damaged connection within the control
A failing touch control module

✓ One safe check you can try

1. Turn off all controls and clean the glass. 2. Switch the cooktop's breaker off for one minute and on again. 3. Test one element on low. 4. If F13 returns, leave the cooktop off. 5. Call us rather than resetting repeatedly.

! Why to stop there

The module is under the glass with live wiring.
A glitch and a failing module look the same until tested.
Repeated resets can mask worsening trouble.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

F64JennAir Radiant Cooktop Code F64: User interface, module or supply trouble FC E0JennAir Induction Cooktop Code FC E0: Supply, Wiring or Induction Module FC E1JennAir Induction Cooktop Code FC E1: Is It the Touchpad or Its Wiring? FC E4JennAir Induction Cooktop Code FC E4: Harness Between Touchpad and Module FC LFJennAir Radiant Cooktop Code FC LF: Left Front Element or Its Wiring FC LRJennAir Radiant Cooktop Message "FC LR": Left Front Hotplate or Wiring FC RFJennAir Radiant Cooktop Code FC RF: Right Front Element or Its Wiring FC RRJennAir Radiant Cooktop Code FC RR: Right Rear Cooking Area Is in Question

F13F13 questions

What does F13 mean?

An internal communication error on the touch control module. It has nothing to do with your pan or the cleanliness of the glass. Cleaning the glass will not help.

Will F13 go away on its own?

Sometimes after a power reset, yes. If it returns, the module needs testing, because a repeat means the cause is still inside the control. Keys may stay dead meanwhile.

Is repair worth it?

We test first and tell you the cause. You get a written price before work begins, so you can decide whether the repair makes sense for you.