Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent JennAir specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 766-5788 Request a Technician
Error code · Built-In Coffee System

JennAir Coffee System Message “FILL TANK!”: Water Tank Empty or Out of Place

FILL TANK! on JennAir RISE and NOIR built-in coffee systems like the JJB6424 means the water tank is empty or incorrectly positioned. Fill the tank with water or insert it correctly, pushing it in as far…

Low risk · DIY check OK
Request a Technician(713) 766-5788
Code
FILL TANK!
Appliance
Built-In Coffee System
Brand
JennAir
Warranty
30-day workmanship

What FILL TANK! means

FILL TANK! on JennAir RISE and NOIR built-in coffee systems like the JJB6424 means the water tank is empty or incorrectly positioned. Fill the tank with water or insert it correctly, pushing it in as far as it goes. The tank also needs to be clean so the float can move freely, and a sticky float can trigger the message.

Common causes of FILL TANK!

  • The water tank is empty
  • The tank is not pushed in fully
  • The float in the tank is not moving freely because it needs cleaning
✓ One safe check you can try

1. Remove the water tank and fill it with fresh water. 2. Rinse the tank and check that the float moves freely. 3. Push the tank in as far as it will go. 4. Start the drink again. 5. If FILL TANK! stays with a full, clean tank, call us.

! Why to stop there
  • A tank issue is an owner task, and a visit would not be needed.
  • A dirty float is a cleaning matter.
  • A tank that is full, clean and seated that still shows the message needs the sensor checked.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Built-In Coffee System codes

INSERT GROUNDS CONTAINERJennAir Coffee System Message "INSERT GROUNDS CONTAINER": Container Not Replaced INSERT MILK CONTAINER!JennAir Coffee System Message "INSERT MILK CONTAINER!": Milk Container Missing SELF DIAGNOSISJennAir Coffee System Message "SELF DIAGNOSIS": Automatic Startup Test GROUND TOO FINE ADJUST MILL INSERT WATER SPOUTJennAir Coffee System Message "GROUND TOO FINE ADJUST MILL INSERT WATER SPOUT": Tank Removed or Air in Line INSERT BREWING UNITJennAir Coffee System Message "INSERT BREWING UNIT": Brewing Unit Missing ADD GROUND COFFEEJennAir Coffee System Message "ADD GROUND COFFEE": Funnel Is Empty CLOSE DOOR!JennAir Coffee System Message "CLOSE DOOR!": Service Door Is Open DESCALE!JennAir Coffee System Message "DESCALE!": Time to Remove Scale
FILL TANK!FILL TANK! questions
Why does it say FILL TANK! when the tank has water?

The tank may be out of position or its float may be stuck. Seat the tank fully and clean the float so it moves freely.

How do I clean the float?

Remove the tank, rinse it and check that the float moves freely. The tank needs to be clean to allow free motion of the float.

Is a service visit ever needed for FILL TANK!?

Call us if the message stays after a clean, full, fully seated tank. We inspect the system and give a written price first. We quote the price in writing first.

Book a visit

Still unsure about FILL TANK!?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 766-5788
☎ Call the desk ▤ Request a Technician