JennAir French-Door Refrigerator Air Filter Indicator: Reset After a New Filter

What Air Filter Indicator means

On JennAir freestanding French-door refrigerators such as the JFFCC72EFS or JFD2589KES, the air filter indicator is a reminder, not an alarm. After a new Freshflow air filter goes in, the stored filter status has to be reset by hand. The filter icons stay lit until you do it. Once the reset is accepted, the icons turn off and the air filter icon returns to its blue color. Nothing is wrong with cooling.

Common causes of Air Filter Indicator

The new air filter was installed but the status was never reset
The AIR FILTER button was not held long enough for the reset to register
The filter has not been replaced yet and the reminder is simply due

✓ One safe check you can try

1. Confirm the new Freshflow air filter is seated in its holder and the cover is closed. 2. Press and hold the AIR FILTER button for 3 seconds. 3. Watch the display: the filter icons should turn off and the air filter icon should return to blue. 4. If your model uses a different reset sequence, follow the one in your owner's manual for that model number.

! Why to stop there

The indicator is a timer-style reminder, so a repair visit does not make it go away any faster than the button does.
Replacing a control board over a reminder icon would cost far more than the problem is worth.
If the icon stays lit after a correct reset, a technician needs to look at the display input, and that is worth a booked visit only then.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

Door AlarmJennAir Built-In Refrigerator Door Alarm: Door or Drawer Left Open Flashing "F"JennAir Built-In Refrigerator Flashing "F": Reset, Then Call If It Stays H2O LightJennAir French-Door Refrigerator H2O Light: Time to Change the Water Filter Interior Light FlashingJennAir Built-In Column Interior Light Flashing: A New Zone Was Selected Over TempJennAir Undercounter Wine Cellar Over Temp: Zone Above Preset for 10 Minutes POJennAir Built-In Refrigerator Code PO: Power Outage Warmed the Freezer Replace FilterJennAir Built-In Column "Replace Filter" Icon: Water Filter Is Overdue Temperature AlarmJennAir Built-In Column Over-Temp Alarm: Temperatures Stayed Too High

Air Filter IndicatorAir Filter Indicator questions

How long do I hold the button?

Hold the AIR FILTER button for 3 seconds. The filter icons should switch off and the air filter icon should go back to blue, which tells you the reset was accepted.

Does the lit indicator mean the refrigerator is not cooling?

No. It only tracks the air filter's status. Fresh food storage and the freezer run normally while the icon is on, so you can reset it whenever you have a new filter in hand.

The icon will not reset even after holding the button. What now?

Try once more after a firm, steady 3-second hold, then check your owner's manual for the sequence for your exact model. If it still stays lit, call us and we quote the price before any work.