JennAir Range Code F2 E1: Check the grates, then the control

What F2 E1 means

On JennAir electric, gas and dual-fuel ranges such as the JES1750FS and JDS1750ML, F2 E1 first asks whether the grates are installed correctly and level. If a grate wobbles when you rock it corner to corner, it may be on backwards and should be swapped. After that, cycle power to reset. If the code remains, the user interface or keypad, the control, or the wiring may be the cause. On RISE and NOIR pro-style ranges F2E1 means a button is stuck or held too long.

Common causes of F2 E1

Grates seated incorrectly or sitting unlevel
Keypad or user interface with a stuck contact
Control or wiring problem

✓ One safe check you can try

1. Turn off all burners and wait until the grates are cool. 2. Lift each grate off and set it down again, rocking it corner to corner and side to side. 3. If one wobbles, swap the grates. 4. Cycle power at the breaker for a minute. 5. On a pro-style range, check no knob or button is held down. If the code stays, call us.

! Why to stop there

The grate check is quick and free, but a code that survives it points to electronics.
A stuck button can hide behind a clean-looking panel.
We confirm the cause first, quote in writing, and warrant work for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

FEE7JennAir Range Code FEE7: Main cavity broil element Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Range Display "12:00" or "Power Loss": Set the Clock After an Outage Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert

F2 E1F2 E1 questions

How can grates cause an error code?

The range asks whether they are seated right and level. A wobbling grate may be installed backwards, so rock each one corner to corner and side to side, and swap them if one wobbles.

What if I have a pro-style range?

On RISE and NOIR pro-style ranges F2E1 points at a button that is stuck or held too long. Release every knob and button, then reset power. Hands off all controls, then switch the breaker off for a minute.

Do I need a technician if the grates were wrong?

Not if the code clears after you reseat the grates and cycle power at the breaker. If F2 E1 returns, the keypad, the control or the wiring needs testing, and on pro-style ranges check again for a held button.