JennAir Range Hot Light On: A Control or Element Is Still Hot

What Indicator or Hot Light On means

On JennAir electric, gas and dual-fuel ranges with electronic oven control, such as the JDS1750ML or JGRP430WP, an indicator or hot light that stays lit means a cooktop control is still on, or an element or burner is still too hot to touch safely. Make sure all cooktop controls are off and allow the cooktop to cool. If the light is still on afterward, a check is needed.

Common causes of Indicator or Hot Light On

A cooktop control is still on
A burner or element is still hot after use
An indicator that stays lit after the surface has cooled

✓ One safe check you can try

1. Check that every cooktop control is in the off position. 2. Keep hands and cloths off the surface until the light goes out. 3. Wait for the cooktop to cool down. 4. If the light stays on after it has cooled, call us.

! Why to stop there

A hot light is a safety signal and usually turns itself off.
Guessing at a sensor on a cooktop surface is not wise.
If it stays on when cool, we check and quote the repair first.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Feature Not AvailableJennAir Range Message "Feature Not Available": Try Again or Disable Power FEE6JennAir Range Code FEE6: Main cavity bake element FEE7JennAir Range Code FEE7: Main cavity broil element Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Range Display "12:00" or "Power Loss": Set the Clock After an Outage Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door

Indicator or Hot Light OnIndicator or Hot Light On questions

How long does the hot light stay on?

Until the surface is cool enough to touch safely. Larger elements and heavy pots can keep it lit longer, so give the cooktop plenty of time to cool.

Is it safe to leave a control on?

No. Make sure all cooktop controls are off. A control left on keeps the surface heating, which is exactly what the light is trying to tell you.

The light stays on after hours. Is that normal?

No. If the cooktop is cool and the light still shows, call us. We will test the circuit and explain our price in writing first.