JennAir Wall Oven Code 1c4c: control or wiring trouble

What 1c4c means

With 1c4c, JennAir built-in wall ovens like the JJW2427DS and JJW8530DDS tell you the oven control or the wiring connected to it may have a problem. This code belongs to the control board family rather than to the door or a sensor. The display shows 1c4c and the oven may not start a bake or broil. Microwave combination ovens list the same code.

Common causes of 1c4c

Oven control board with an internal problem
Damaged wiring or connector at the control

✓ One safe check you can try

1. Press Cancel once and let the display rest. 2. Turn the breaker off for two minutes and back on. 3. Confirm the oven wakes up and takes a clock setting. 4. If 1c4c is back at the next bake, stop and call us for a check.

! Why to stop there

Control repairs need electrical testing that cannot be done safely from the front of the oven.
Different JennAir ovens use different boards, so the exact part matters.
A written price comes first, and our work has a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Feature Not AvailableJennAir Wall Oven Message "Feature Not Available": Follow the Prompt on the Display Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Wall Oven Display Flashing Time or 12:00: Set the clock after power loss Locked, Lock or LocJennAir Wall Oven Display Locked, Lock or Loc: Controls and door are locked Press Cancel to ResetJennAir Wall Oven Message "Press Cancel to Reset": Clear and power cycle Probe or Insert ProbeJennAir Wall Oven Display Probe or Insert Probe: Meat probe needed PUSH or PSHJennAir Wall Oven Display PUSH or PSH: Press start Sabbath, Sab, 5Ab, or 5A7JennAir Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Sabbath mode is on FC E6JennAir Wall Oven Code FC E6: Wi-Fi power module

1c4c1c4c questions

My oven turns on but never heats and shows 1c4c. Why?

The control may be powered yet unable to switch the elements because of the problem it reports. The display lights, but the heating command never completes.

Is it worth resetting more than once?

One reset is fine. Repeated resets do not fix a control problem and keep stressing the board, so after one repeat we would stop and book a visit.

Does a firm 1c4c mean the control must be replaced?

Not always. The wiring is part of the official meaning, so we check connectors and harness first, then recommend a board only if it tests bad.