JennAir Wall Oven Code 1c6c: oven control and harness

What 1c6c means

A JennAir wall oven such as the JJW2830DS or JJW9830DDP that shows 1c6c has detected a possible problem with the oven control or its wiring. The code comes from the control family, so the cooking parts may be fine while the board that commands them is not. The display shows 1c6c, and the oven can stop partway through a cycle.

Common causes of 1c6c

Oven control reporting a problem
Wiring between the control and other parts loose or worn

✓ One safe check you can try

1. Turn the cycle off with Cancel. 2. Let the oven rest for several minutes. 3. Switch the oven breaker off for two minutes and restore it. 4. Run a short test bake. If 1c6c shows again, call us. Skip the self-clean until the code is gone.

! Why to stop there

The board sits behind the cabinet and needs the oven pulled out for access.
A reset can hide a failing board, only to have it quit during a holiday meal.
We confirm the cost in writing, and the repair is covered for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Press Cancel to ResetJennAir Wall Oven Message "Press Cancel to Reset": Clear and power cycle Probe or Insert ProbeJennAir Wall Oven Display Probe or Insert Probe: Meat probe needed PUSH or PSHJennAir Wall Oven Display PUSH or PSH: Press start Sabbath, Sab, 5Ab, or 5A7JennAir Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Sabbath mode is on FC E6JennAir Wall Oven Code FC E6: Wi-Fi power module FC E7JennAir Wall Oven Code FC E7: Oven did not connect to router FC E8JennAir Wall Oven Code FC E8: Registration error FC E9JennAir Wall Oven Code FC E9: Wi-Fi power module wiring

1c6c1c6c questions

Why did my oven stop in the middle of a cycle with 1c6c?

When the control senses its own problem, it may shut the cycle down to protect the oven. That is why food may stop cooking even though you did not touch the oven.

Will 1c6c affect the clock only?

Usually it is more than the clock. The oven control runs heating and timing, so any cooking function can be blocked while the code is active.

Can I wait a few days before the repair?

If the oven reset cleanly, you may use it carefully. But a control that already reported once can do it again, so we suggest booking soon.