JennAir Combination Wall Oven Code F1 E6: thermistor reading or a microwave generation error

What F1 E6 means

Across JennAir combination wall ovens, F1 E6 means a possible problem with the microwave thermistor or sensor, or its wiring. The older JMW2430D generation uses the same code for a microwave generation error, involving the door switches, the microwave relay, the inverter and the magnetron. Either way, the microwave side stops working and the display shows F1 E6. Dinner reheated in the microwave comes out cold while the code is up.

Common causes of F1 E6

Microwave thermistor or sensor out of range
Door switch or microwave relay not completing the microwave circuit
Inverter or magnetron failing to generate microwave power

✓ One safe check you can try

1. Press Cancel and open and close the microwave door firmly. 2. Check the door edge for debris. 3. Cut power at the breaker for about a minute to let the microwave sensor reading reset, then restore it. 4. Try a brief cup-of-water test. 5. Should the oven display F1 E6 again, we are one call away from checking the microwave sensor.

! Why to stop there

The same code can mean a sensor on one model and a power problem on another, so we confirm the platform first.
Microwave circuits are high voltage and need a trained technician.
Skipping the diagnosis risks replacing a costly part that was not the cause.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Press Cancel to ResetJennAir Wall Oven Message "Press Cancel to Reset": Clear and power cycle Probe or Insert ProbeJennAir Wall Oven Display Probe or Insert Probe: Meat probe needed PUSH or PSHJennAir Wall Oven Display PUSH or PSH: Press start Sabbath, Sab, 5Ab, or 5A7JennAir Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Sabbath mode is on FC E6JennAir Wall Oven Code FC E6: Wi-Fi power module FC E7JennAir Wall Oven Code FC E7: Oven did not connect to router FC E8JennAir Wall Oven Code FC E8: Registration error FC E9JennAir Wall Oven Code FC E9: Wi-Fi power module wiring

F1 E6F1 E6 questions

Why does F1 E6 have two meanings?

The model generation decides. On current combination ovens it points to a microwave thermistor or sensor. On the JMW2430D series it is a generation error. Tell us your model and we match it.

Could the door cause F1 E6?

On the older platform, door switches are part of the generation check, so a door that does not register can set the code. We test the switches along with the other parts.

What happens on the visit?

We identify the platform, test the listed parts and quote in writing before starting. Our repairs include a 30-day workmanship warranty. Our written quote names the part being replaced before work starts.