Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent JennAir specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 766-5788 Request a Technician
Error code · Wall Oven

JennAir Wall Oven Message “Feature Not Available”: Follow the Prompt on the Display

On JennAir built-in wall ovens such as the JJW2830DS and JJW2427DS, this message scrolls across the display when the oven detects a problem while you are programming a cook cycle. It tells you what to do…

Medium · inspection needed
Request a Technician(713) 766-5788
Code
Feature Not Available
Appliance
Wall Oven
Brand
JennAir
Warranty
30-day workmanship

What Feature Not Available means

On JennAir built-in wall ovens such as the JJW2830DS and JJW2427DS, this message scrolls across the display when the oven detects a problem while you are programming a cook cycle. It tells you what to do next: follow the displayed directions, either "PRESS ENTER TO TRY AGAIN" or "DISABLE POWER TO CLEAR." The same message is also listed for combination ovens that include a built-in microwave.

Common causes of Feature Not Available

  • A setting you chose is not available for the selected cycle
  • A momentary control problem while programming
  • A recurring control or wiring problem if the message returns
✓ One safe check you can try

1. Read the display carefully, since it scrolls. 2. If it says PRESS ENTER TO TRY AGAIN, press Enter and set the cycle again. 3. If it says DISABLE POWER TO CLEAR, switch the breaker off for one minute and back on. 4. Try a simple bake. If the message returns for a cycle that used to work, call us.

! Why to stop there
  • A single scroll is often harmless, but repeats mean something is wrong inside.
  • Guessing at settings can hide a true control problem.
  • Our quote is written before we begin, and workmanship is warranted for 30 days.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Wall Oven codes

FC E9JennAir Wall Oven Code FC E9: Wi-Fi power module wiring Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Wall Oven Display Flashing Time or 12:00: Set the clock after power loss Locked, Lock or LocJennAir Wall Oven Display Locked, Lock or Loc: Controls and door are locked Press Cancel to ResetJennAir Wall Oven Message "Press Cancel to Reset": Clear and power cycle Probe or Insert ProbeJennAir Wall Oven Display Probe or Insert Probe: Meat probe needed PUSH or PSHJennAir Wall Oven Display PUSH or PSH: Press start Sabbath, Sab, 5Ab, or 5A7JennAir Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Sabbath mode is on FC E6JennAir Wall Oven Code FC E6: Wi-Fi power module
Feature Not AvailableFeature Not Available questions
Why does the message appear only on some cycles?

Some features are not available together, so if the prompt says to try again, pick a different setting and see if it clears. The message scrolls only while you are programming a cycle.

What does DISABLE POWER TO CLEAR mean?

It tells you to switch the oven off at the breaker for a short time, which resets the control. Turn it back on, set the clock, and start the cycle again.

When do I need a technician?

If the message keeps returning with a cycle that should be available, the control may have a problem. Tell us which cycle you were setting and we can test it.

Book a visit

Still seeing Feature Not Available?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 766-5788
☎ Call the desk ▤ Request a Technician