JennAir Wall Oven Display PUSH or PSH: Press start

What PUSH or PSH means

On JennAir built-in wall ovens such as the JJW2830DS and JJW2427DS, PUSH or PSH is a prompt, not an error. It means you have chosen an oven function but not pressed Start. The Start pad begins any oven function, and if it is not pressed within five seconds, PUSH or PSH appears. If Start is not pressed within one minute, the function is canceled and the time of day returns. The same prompt exists on combination ovens with a microwave.

Common causes of PUSH or PSH

Start pad not pressed after choosing a function
Delay longer than five seconds before pressing Start
Start pad not responding

✓ One safe check you can try

1. Choose your function and temperature again. 2. Press Start within five seconds. 3. Confirm the oven begins heating. 4. If Start does nothing after repeated tries, clean the pad gently and reset power at the breaker for one minute. A pad that stays dead needs a technician.

! Why to stop there

Most PUSH messages disappear when Start is pressed.
A dead Start pad is a keypad or control matter.
If a keypad repair is needed, the price is written first and the work is warranted for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Wall Oven Display Flashing Time or 12:00: Set the clock after power loss Locked, Lock or LocJennAir Wall Oven Display Locked, Lock or Loc: Controls and door are locked Press Cancel to ResetJennAir Wall Oven Message "Press Cancel to Reset": Clear and power cycle Probe or Insert ProbeJennAir Wall Oven Display Probe or Insert Probe: Meat probe needed Sabbath, Sab, 5Ab, or 5A7JennAir Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Sabbath mode is on FC E6JennAir Wall Oven Code FC E6: Wi-Fi power module FC E7JennAir Wall Oven Code FC E7: Oven did not connect to router FC E8JennAir Wall Oven Code FC E8: Registration error

PUSH or PSHPUSH or PSH questions

Is PSH a problem with my oven?

No. It is a reminder that you chose a function but have not pressed Start. The prompt appears after five seconds, and pressing Start begins the function.

What happens if I ignore PUSH?

After about one minute without Start, the oven cancels the function and shows the time of day again. You then choose the function once more and press Start.

Start isn't working. What now?

Clean the pad with a barely damp cloth, reset power at the breaker for a minute, and try again. If Start still does nothing, we test the keypad.