JennAir JMV Code AccuPop Fail: popcorn sensor could not run

What AccuPop Fail means

On JennAir over-the-range microwave hoods such as the JMV9196CS and the JMV8000 series, the message AccuPop Fail means the oven could not carry out the popcorn function. The microwave points to the AccuPop sensor as the likely problem. The owner sees the message on the display, and the popcorn cycle stops or refuses to start while ordinary timed cooking may still work.

Common causes of AccuPop Fail

The AccuPop sensor is not reporting a usable reading
Wiring or connector between the sensor and the control has a poor contact
The control board is not reading the sensor signal

✓ One safe check you can try

1. Press Stop/Cancel and let the microwave sit for a minute. 2. Open the door, check that nothing blocks the vent area above the door, and close it firmly. 3. Try a normal timed cook with a cup of water for 30 seconds. 4. Skip the popcorn key and use manual time until the sensor is checked. Do not pull the microwave from the wall.

! Why to stop there

The sensor sits inside the hood housing, so it can only be tested with the unit opened and meters in hand.
A guessed part swap can leave the popcorn cycle failing and cost you a second visit.
Over-the-range hoods are heavy and hang above a cooktop; unmounting one without help risks injury.
We quote the price in writing before any work and back repairs with a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Microwave codes

F8 E3JennAir Built-In Microwave Code F8 E3: one more cooling alert Sabbath, Sab, 5Ab, or 5A6JennAir Built-In Microwave Message "Sabbath, Sab, 5Ab, or 5A6": Sabbath Mode On F8 E4JennAir Built-In Microwave Code F8 E4: exhaust air sensor SEJennAir JMV Code SE: keypad problem F8E5JennAir JMV Code F8E5: exhaust air temperature sensor F9JennAir JMV Code F9: appliance or relay control board F9Q1JennAir JMV Code F9Q1: touch pad problem FC E1JennAir OTR Microwave Code FC E1: router connection timed out

AccuPop FailAccuPop Fail questions

Is it safe to keep using the microwave with AccuPop Fail showing?

Timed cooking usually still works because only the popcorn sensing is involved. Use manual time and watch the bag closely, since the sensor is not guiding the cycle. If other functions also stop, unplug the unit and call us.

Will changing the popcorn bag brand fix it?

No. The message says the oven could not run the function and points at its sensor, not at the bag. A different bag will give the same message until the sensor or its connection is repaired.

Does the microwave need to come off the wall for this repair?

Often it can be reached after the unit is carefully lowered or its cover is opened, depending on the install. We tell you before we start, and the written price covers the labor.