On JennAir dishwashers such as the JDTSS247HS or JDAF3924RX, all the cycle and options selected lights flash when the door is opened during a running cycle. The flashing shows that the cycle is suspended. It is…
On JennAir dishwashers such as the JDTSS247HS or JDAF3924RX, all the cycle and options selected lights flash when the door is opened during a running cycle. The flashing shows that the cycle is suspended. It is normal behavior, not a defect. Firmly close the door until it latches, and the lights stop flashing; after a short delay the cycle resumes by itself.
1. Push the door shut until you hear it latch. 2. Wait a few seconds. The lights should stop flashing and the cycle resumes after a slight delay. 3. If the lights keep flashing, open and close the door once more, with nothing blocking the edge. 4. If it never latches, call us.
No. The dishwasher is telling you the cycle paused because the door was opened. Close the door until it latches and the cycle carries on by itself after a short delay.
Yes, but be careful of hot steam and water. Closing the door until it latches restarts the cycle after a short delay, no buttons needed.
Check for items sticking out of the racks. If the door still will not catch, call us and we will inspect it and quote in writing.
A technician diagnoses it on site and gives you the price in writing before any work starts.
