JennAir Steam Oven Code F7 E1: boiler temperature sensor

What F7 E1 means

For JennAir wall ovens with steam cooking, F7 E1 means the water boiler temperature sensor, or its wiring, is not working correctly. The boiler heats the water to make steam, and the sensor tells the control how hot it is. The display shows F7 E1 and steam cycles are blocked, since the control cannot judge the boiler. On JennAir ranges the same code refers to a door switch instead.

Common causes of F7 E1

Water boiler temperature sensor reading incorrectly
Loose or damaged wiring at the boiler sensor

✓ One safe check you can try

1. Press Cancel and turn the oven off. 2. Let the oven cool fully, since steam parts get very hot. 3. Check the water container is filled and seated. 4. Turn the breaker off for two minutes and back on, then try one steam cycle. 5. If F7 E1 returns, stop and call us.

! Why to stop there

The boiler and its sensor are inside the oven body and reached only after removing covers.
Wiring near a steam boiler involves heat, water and line voltage together.
Our price is written before work, with a 30-day workmanship warranty on the repair.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Wall Oven Display Flashing Time or 12:00: Set the clock after power loss Locked, Lock or LocJennAir Wall Oven Display Locked, Lock or Loc: Controls and door are locked Press Cancel to ResetJennAir Wall Oven Message "Press Cancel to Reset": Clear and power cycle Probe or Insert ProbeJennAir Wall Oven Display Probe or Insert Probe: Meat probe needed PUSH or PSHJennAir Wall Oven Display PUSH or PSH: Press start Sabbath, Sab, 5Ab, or 5A7JennAir Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Sabbath mode is on FC E6JennAir Wall Oven Code FC E6: Wi-Fi power module FC E7JennAir Wall Oven Code FC E7: Oven did not connect to router

F7 E1F7 E1 questions

Is the boiler dangerous if F7 E1 appears?

The control stops steam when it cannot read the boiler temperature, which is the safe response. Do not try to open the oven body, and let a technician check the sensor and wiring.

Will descaling remove F7 E1?

Descaling helps with mineral problems, but the code is about the sensor and its wiring. If the code returns after you follow the oven's cleaning routine, the sensor itself is suspect.

Can I use the regular bake modes?

Often yes, because they do not rely on the boiler. Watch for the code reappearing, and avoid steam modes until the sensor is tested. Treat the steam features as off-limits until we have tested the boiler sensor.