JennAir Wall Oven Code FC E2: router connection lost

What FC E2 means

JennAir built-in wall ovens with Wi-Fi, such as the JJW2427DS and JJW8530DDS, display FC E2 when the appliance could not connect to the router. JennAir lists the same possible causes as FC E1, namely a connection timeout, poor signal strength, a failed router, the oven's Wi-Fi module, or its wiring. The oven still cooks while the code shows. The oven keeps baking and broiling as usual.

Common causes of FC E2

Poor signal strength between router and oven
Router that has failed or changed settings
Wi-Fi module inside the oven

✓ One safe check you can try

1. Restart your router and wait two minutes. 2. Check that your phone connects near the oven. 3. Leave the breaker off for a minute, then turn the oven on and watch the router link result. 4. Turn it on and wait sixty seconds, watching the display. 5. When FC E2 shows up again, please call us rather than reset the router link a third time.

! Why to stop there

Resetting a router is something you can do in minutes at no cost.
Wi-Fi modules are sealed inside the control housing.
Replacing a module will not help if the network is the problem.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Press Cancel to ResetJennAir Wall Oven Message "Press Cancel to Reset": Clear and power cycle Probe or Insert ProbeJennAir Wall Oven Display Probe or Insert Probe: Meat probe needed PUSH or PSHJennAir Wall Oven Display PUSH or PSH: Press start Sabbath, Sab, 5Ab, or 5A7JennAir Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Sabbath mode is on FC E6JennAir Wall Oven Code FC E6: Wi-Fi power module FC E7JennAir Wall Oven Code FC E7: Oven did not connect to router FC E8JennAir Wall Oven Code FC E8: Registration error FC E9JennAir Wall Oven Code FC E9: Wi-Fi power module wiring

FC E2FC E2 questions

Does FC E2 affect baking?

No, the code is about connectivity. Cooking functions should work as usual, though connected features may be unavailable. The oven is working, so the only thing lost is the connected feature set.

What changed if it worked before?

A new router, a changed password or a weaker signal are common reasons. Check those first. Often the cause is a new router, new password or a weak signal near the oven.

Do you repair Wi-Fi modules?

Yes, if the oven itself is the cause. We test first, give a written price and warrant our work for 30 days. We list parts and labor in writing first, and warrant our own work for 30 days.