Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent JennAir specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 766-5788 Request a Technician
Error code · Range

JennAir Range Display “ES” or “E5”: Energy save is active

On some JennAir electric, gas and dual-fuel ranges with a clock display, such as the JES1750FS or JDS1750ML, ES or E5 means Energy Save is active. The control and clock go into a sleep mode that…

Low risk · DIY check OK
Request a Technician(713) 766-5788
Code
ES or E5
Appliance
Range
Brand
JennAir
Warranty
30-day workmanship

What ES or E5 means

On some JennAir electric, gas and dual-fuel ranges with a clock display, such as the JES1750FS or JDS1750ML, ES or E5 means Energy Save is active. The control and clock go into a sleep mode that reduces power use by turning off the display when the range is idle. After five minutes with only the time showing, the display switches over. It is a setting, not an error.

Common causes of ES or E5

  • Energy Save is turned on in the control settings
  • The range has been idle for five minutes with only the time of day showing
  • The setting was changed accidentally from the control
✓ One safe check you can try

1. Touch a pad on the control to wake the display. 2. Look at your owner's guide for how to turn Energy Save off on your model. 3. If you want the display always on, switch the setting off. 4. Turn the range off at the breaker for one minute if the display seems stuck. 5. Call us if the display stays dark or the code is not Energy Save.

! Why to stop there
  • Energy Save is a normal feature, so no part is broken.
  • Resetting power does not change a saved setting.
  • If the display is truly dead, that is a different problem to test.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

FEE7JennAir Range Code FEE7: Main cavity broil element Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Range Display "12:00" or "Power Loss": Set the Clock After an Outage Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert
ES or E5ES or E5 questions
Is ES or E5 an error code?

Not here. On models with this feature, it tells you Energy Save is on and the display has gone to sleep. Touching the control wakes it.

How is E5 different from F1 E5?

F1 E5 is a two-part code that points to the oven control or wiring. The plain ES or E5 is the Energy Save notice and does not stop cooking.

Can you turn Energy Save off for me?

Yes, and we can show you where the setting is. If the display still looks odd after that, we check the control and give you a written price first.

Book a visit

Still unsure about ES or E5?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 766-5788
☎ Call the desk ▤ Request a Technician