JennAir Pro-Style Range Overheats in Self-Clean: Code F6E3

What F6E3 means

On JennAir RISE and NOIR pro-style ranges with knob controls, such as the JDRP548HL or JGRP536WP, F6E3 shows when the oven temperature climbs too high during the self-clean cycle. To protect the range, the controls lock until the oven cools down. You will see the code on the display and the cycle will stop, with the controls unavailable until the cavity cools.

Common causes of F6E3

The oven overheated during a self-clean cycle
Heavy soil or a full load burning off and pushing temperatures up
A temperature control problem if it happens repeatedly

✓ One safe check you can try

1. Do not open the oven door; leave the cycle off. 2. Let the range cool completely, which can take a couple of hours. 3. Once the controls unlock, wipe out loose debris and remove racks and foil. 4. If F6E3 returns on the next clean, skip self-clean and call us.

! Why to stop there

The oven is protecting itself from heat, and forcing a restart can make it worse.
If it overheats again, the temperature control needs a measured check.
We quote the price in writing before any work.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert Probe or Insert ProbeJennAir Range Display "Probe" or "Insert Probe": Meat Probe Not Detected PUSH or PSHJennAir Range Display "PUSH" or "PSH": Press Start to Begin Sabbath, Sab, 5Ab, or 5A7JennAir Range Display "Sabbath", "Sab", "5Ab" or "5A7": Sabbath Mode Is On FC E8Registration Error During App Setup: JennAir Range FC E8 FC E9JennAir Range Wi-Fi Power Module Reported Again (FC E9)

F6E3F6E3 questions

Why are my controls locked?

To protect the range, the controls stay locked when the cavity is too hot in self-clean. They free up once the oven has cooled down.

Can I run self-clean again right away?

Wait until it is fully cool. If F6E3 comes back on the next cycle, stop using self-clean and call us, because something may be holding the temperature too high.

Is F6E3 different from F6 E3 on other ranges?

Yes. F6 E3 with a space on electronic-control ranges concerns the Appliance Manager. This page is for the pro-style knob ranges and the self-clean overheating message.