JennAir Range Code F7 E0: Oven door latch assembly

What F7 E0 means

On JennAir electric, gas and dual-fuel ranges like the JES1750FS and JDS1750ML, F7 E0 indicates a possible problem with the oven door latch assembly or the associated wiring. The control expects the latch to move and confirm its position, and it cannot. On JennAir steam wall ovens the same code instead refers to the water level or water level sensor, so do not mix the two.

Common causes of F7 E0

Door latch assembly not completing its movement
Latch motor or contacts wearing out
Wiring between latch and control

✓ One safe check you can try

1. Press Cancel and wait until the oven is cool to the touch. 2. Open the door and clear the frame of foil or racks. 3. Close it fully and wait. 4. Turn the range off at the breaker, wait sixty seconds, and turn it back on. 5. Try a short bake. If the door will not unlock or the code returns, call us and avoid prying.

! Why to stop there

Latch assemblies have small motors and springs in a hot area.
A latch that sticks may trap the door shut after a clean.
We provide a written price first and a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Range Display "12:00" or "Power Loss": Set the Clock After an Outage Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert Probe or Insert ProbeJennAir Range Display "Probe" or "Insert Probe": Meat Probe Not Detected

F7 E0F7 E0 questions

Is F7 E0 a water code?

Not on a range. The water level meaning of F7 E0 applies to steam wall ovens only. On this range the code points to the door latch assembly and its wiring, so we test the latch.

How is F7 E0 different from F5?

Both involve the latch. F7 E0 names only the latch assembly and its wiring, while F5 also mentions the latch switches, so the tests we run start in slightly different places.

My door won't open. What now?

Let the oven cool and reset power. If it stays locked, call us and we will release it without damage. Do not pry it, because we can release the latch without damaging the door.