JennAir Range Code 1c82: Oven control wiring check

What 1c82 means

A 1c82 message on a JennAir range with electronic oven control, for example the JIS1450DS or JGRP430WP, tells you that something is wrong with the oven control or with the wiring that connects to it. The range protects itself by halting oven functions, so you may find a cold oven and a flashing code where the clock normally sits. Because the message is general, a technician has to look at the board and its connections to say which one is to blame.

Common causes of 1c82

The oven control board has failed internally
A connector or wire between the control and the oven has worked loose
Damage to the wiring between the control and the oven

✓ One safe check you can try

1. Press Cancel once and wait a few seconds. 2. Cut power to the range at the panel for a full minute before restoring it. 3. Set a brief Bake and check that the oven actually warms. 4. When 1c82 appears a second time, stop baking and book a visit. 5. Keep racks and pans out of the oven until it has been looked at.

! Why to stop there

Wiring and the control board sit behind the panel, and they cannot be tested safely without proper meters.
A reset will not repair a loose connection or a worn board.
Guessing at a part can cost more than a proper diagnosis with a written price.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

FEE6JennAir Range Code FEE6: Main cavity bake element FEE7JennAir Range Code FEE7: Main cavity broil element Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Range Display "12:00" or "Power Loss": Set the Clock After an Outage Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door

1c821c82 questions

Is 1c82 different from 1c81?

Both entries describe the oven control or its wiring. The last digit separates the two entries on the control, but both lead to the same inspection of the board and the wiring.

Why does the oven stay cold with 1c82 showing?

The control stops oven functions when it detects a problem it cannot control. Heating is blocked until the control and wiring are corrected, so the oven stays cold.

Do you diagnose 1c82 in Houston?

Yes. We come to your home, check the control and its wiring, and give you a written price before any work. Repairs carry our 30-day workmanship warranty.