JennAir Range Code 1d21: Sensor, control or wiring reading issue

What 1d21 means

Code 1d21 on JennAir electric, gas and dual-fuel ranges, for example the JDRP548W or JES1750FS, reports a possible problem with the oven temperature sensor, the control, or the wiring that carries the sensor signal. The oven stops its cycle as a precaution. Owners often notice food half cooked and the display flashing 1d21. A technician tests the sensor, the control and the wiring one at a time.

Common causes of 1d21

The oven temperature sensor has drifted or failed
Oven control problem reading the sensor
Loose or damaged sensor wiring

✓ One safe check you can try

1. Take out any food and let the oven cool. 2. Press Cancel and wait. 3. Power the range down at the breaker for a minute. 4. Test with a simple Bake at 350 degrees. 5. If 1d21 appears again, stop and book a visit with us. A cold, half-cooked dish is a good detail to mention.

! Why to stop there

Sensors are cheap compared with a control, so the right diagnosis saves money.
Opening the oven back wall is not safe for owners.
A hot oven with a misread temperature can ruin dishes.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert Probe or Insert ProbeJennAir Range Display "Probe" or "Insert Probe": Meat Probe Not Detected PUSH or PSHJennAir Range Display "PUSH" or "PSH": Press Start to Begin Sabbath, Sab, 5Ab, or 5A7JennAir Range Display "Sabbath", "Sab", "5Ab" or "5A7": Sabbath Mode Is On FC E8Registration Error During App Setup: JennAir Range FC E8 FC E9JennAir Range Wi-Fi Power Module Reported Again (FC E9)

1d211d21 questions

Why did my food come out undercooked before 1d21 appeared?

A failing sensor can read wrong before it fails fully, so the oven may heat unevenly. The code appears when the control finally decides the reading cannot be trusted.

Is 1d21 covered by a power reset?

A reset can clear a momentary glitch. If the sensor or wiring is damaged, the code returns as soon as the oven heats up again, so a repeat means a repair is due.

Can you service JennAir ranges outside Houston proper?

We cover the Houston metro area. Call with your address and model, and we confirm availability and a three-hour arrival window, with a written price before any work.