JennAir Range Code F1-3: Temperature sensor circuit concern

What F1-3 means

The JennAir range code F1-3, seen on models like the JDS1750ML and JIS1450DS, indicates the oven temperature sensor, the control, or the wiring around them may have a problem. It reads like F1-2 and carries the same message. The control halts the oven, and the display remains on the code until the cause is addressed. Which of the three is responsible only shows up in testing.

Common causes of F1-3

Failed or drifting oven temperature sensor
The control is not reading the sensor
Sensor wiring problem

✓ One safe check you can try

1. Let the oven cool with the door shut. 2. Press Cancel. 3. Power-cycle the range at the breaker, leaving it off for sixty seconds. 4. Run a short Bake test and watch the display. 5. If F1-3 returns, keep the oven off and call us.

! Why to stop there

Intermittent sensor codes are the hardest to catch without testing.
Swapping a sensor before checking the wire may not help.
Operating with a doubtful reading wastes food and energy.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert Probe or Insert ProbeJennAir Range Display "Probe" or "Insert Probe": Meat Probe Not Detected PUSH or PSHJennAir Range Display "PUSH" or "PSH": Press Start to Begin Sabbath, Sab, 5Ab, or 5A7JennAir Range Display "Sabbath", "Sab", "5Ab" or "5A7": Sabbath Mode Is On FC E8Registration Error During App Setup: JennAir Range FC E8 FC E9JennAir Range Wi-Fi Power Module Reported Again (FC E9)

F1-3F1-3 questions

Does F1-3 mean the oven will not heat at all?

Often, yes. The control blocks heating when the reading is in doubt. In some cases the oven heats until the code appears, then shuts off mid-cycle.

Can I use the cooktop with F1-3 on the display?

That depends on the model. The code concerns the oven, but if any surface unit acts oddly, switch off the range at the breaker and call us.

How do I book you for F1-3?

Call with the model and code. We schedule a 3-hour window in the Houston area, quote the price in writing first, and back the repair with a 30-day warranty.