JennAir Range Code 1c81: Oven control or wiring problem

What 1c81 means

On JennAir electric, gas and dual-fuel ranges with electronic oven control, such as the JES1750FS or JDS1750ML, code 1c81 points to the oven control or the wiring connected to it. The control has noticed something it cannot work around, so the oven stops baking and the display shows 1c81 instead of the time. Nothing in the message singles out a burner or a heating element.

Common causes of 1c81

The oven control itself is not reading or driving its circuits correctly
Wiring connected to the oven control has a loose or damaged connection

✓ One safe check you can try

1. Touch Cancel and see whether the clock comes back. 2. Switch the range off at its breaker, count to sixty, then switch it on again. 3. Start a ten-minute Bake at 350 degrees and watch the display. 4. If 1c81 shows up again, leave the oven off and call us. 5. Keep the control panel and the range's back cover closed.

! Why to stop there

The code names the control and its wiring, and both sit behind the panel where line voltage is present.
A power reset only clears a one-time glitch, it cannot repair a failing board.
Replacing a control before the wiring is checked can leave the real problem in place.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Feature Not AvailableJennAir Range Message "Feature Not Available": Try Again or Disable Power FEE6JennAir Range Code FEE6: Main cavity bake element FEE7JennAir Range Code FEE7: Main cavity broil element Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Range Display "12:00" or "Power Loss": Set the Clock After an Outage Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface

1c811c81 questions

What does 1c81 mean on my JennAir range?

It means the electronic oven control, or the wiring tied to it, has a problem. The oven will not bake normally while the code is showing, and the display no longer shows the clock.

Will resetting the breaker fix 1c81?

Sometimes, if the code was a one-time glitch. If it returns when you bake again, the control or its wiring needs to be checked on site, not reset over and over.

Can I keep using the cooktop with 1c81?

On many ranges the surface burners run separately, but we cannot promise that for your model. If the code appears, we recommend a visit, and you get a written price before we start.