JennAir Range Code 9d41: Latch or switch wiring notice

What 9d41 means

A JennAir range such as the JDS1750ML or JES1750FS shows 9d41 when the oven door latch assembly, the door switch or the associated wiring may have a problem. This entry belongs to the same latch group as the other 9d codes. You may see the oven refuse to heat and the display hold 9d41 until power is cycled. The display keeps the code until power is cycled.

Common causes of 9d41

Oven door latch assembly wear
Door switch contact trouble
Loose or damaged latch wiring

✓ One safe check you can try

1. Let the oven cool fully. 2. Open and shut the door once, looking for anything caught in it. 3. Press Cancel. 4. Let the range sit without power for a minute, then restore it. 5. If 9d41 is back, stop using the oven and call us.

! Why to stop there

The oven door is a heat barrier, and a poor latch weakens it.
Switch and wiring checks are done with power isolated.
Replacing parts blindly can add to the bill.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

FC E9JennAir Range Wi-Fi Power Module Reported Again (FC E9) Feature Not AvailableJennAir Range Message "Feature Not Available": Try Again or Disable Power FEE6JennAir Range Code FEE6: Main cavity bake element FEE7JennAir Range Code FEE7: Main cavity broil element Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Range Display "12:00" or "Power Loss": Set the Clock After an Outage Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up

9d419d41 questions

Do all the 9d codes need the same repair?

They share one official meaning, but the repair depends on which part failed. We test the latch, switch and wiring on site, and tell you what we found.

Why does the oven cool down so quickly after 9d41?

The control switches heating off when it loses the door signal, so the oven loses heat. This is normal protective behavior and not a sign of a failed element.

Is a call-out fee charged?

We explain our price in writing before work starts, including any diagnostic charge, so there are no surprises. Approved repairs carry a 30-day workmanship warranty.