JennAir Range Code 9d52: Door switch circuit notice

What 9d52 means

JennAir ranges such as the JDS1750ML and JIS1450DS can show 9d52 when the oven door latch assembly, the door switch, or the wiring between them may have a problem. The control did not get a clean door reading, so it stops any heating. You may notice the clock gone and the code in its place. The code appears in place of the clock.

Common causes of 9d52

The door latch assembly is not signaling properly
The door switch is failing
Wiring to the switch has lost continuity

✓ One safe check you can try

1. Cool the oven. 2. Check that the door sits flush and that the gap is free of debris. 3. Press Cancel. 4. Cycle the breaker off for one minute. 5. Call us if 9d52 returns, and keep the oven off until then.

! Why to stop there

Door safety checks are not something to bypass.
You cannot see the switch once the door is closed.
Quick resets just delay the repair.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

FC E9JennAir Range Wi-Fi Power Module Reported Again (FC E9) Feature Not AvailableJennAir Range Message "Feature Not Available": Try Again or Disable Power FEE6JennAir Range Code FEE6: Main cavity bake element FEE7JennAir Range Code FEE7: Main cavity broil element Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Range Display "12:00" or "Power Loss": Set the Clock After an Outage Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up

9d529d52 questions

Is there anything I can do to avoid 9d52?

Close the door gently, keep the edge free of spills and foil, and do not lean on the open door. These help, but a failing latch will still need repair.

Can 9d52 happen on a gas range?

Yes. The door latch and switch exist on gas, electric and dual-fuel ranges, so the code applies to all of them. Gas smell is a separate matter: leave and call the utility.

How are repairs priced?

We give a written price after inspection and before any part is ordered. If you approve, the work is covered by our 30-day workmanship warranty.