JennAir Range Code F1 E1: Oven control problem

What F1 E1 means

On JennAir electric, gas and dual-fuel ranges that show the F#E# format, such as the JES1750FS or JGRP430WP, F1 E1 means a possible problem with the oven control or its wiring. The display alternates the F1 and E1 and the oven stops. This is the same area as the 1c8 and 4d3 numeric codes, shown in the older two-part style.

Common causes of F1 E1

Oven control has detected an internal problem
Wiring connected to the control is failing or loose

✓ One safe check you can try

1. Press Cancel once. 2. Switch the breaker feeding the range off for a minute and restore it. 3. Start a short Bake and see whether F1 E1 repeats. 4. If it does, quit using the oven for now. 5. Call us instead of opening the control area. On a gas range, if you ever smell gas, leave the house and call the gas utility from outside.

! Why to stop there

F1 E1 names the control, a sealed part with line voltage close by.
A temporary clear is common, but the code usually returns.
Pulling the range away from the wall can strain the gas line on gas models.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert Probe or Insert ProbeJennAir Range Display "Probe" or "Insert Probe": Meat Probe Not Detected PUSH or PSHJennAir Range Display "PUSH" or "PSH": Press Start to Begin

F1 E1F1 E1 questions

How do I read F1 E1 on the display?

The control flashes F1 and then E1. Read them together as one code. It reports an oven control or wiring problem, the same family as other F1 entries.

Does F1 E1 mean the oven is ruined?

No. Most of the time a control or wiring repair brings the oven back. We confirm which one it is and give you a written price before we start.

Should I smell gas with this code?

F1 E1 is not a gas message. But on a gas range, if you ever smell gas, leave the house and call the gas utility from outside before anything else.