JennAir Range Code F1 E2: Control or wiring check

What F1 E2 means

The F1 E2 code on JennAir electric, gas and dual-fuel ranges, for example the JIS1450DS, indicates a possible problem with the oven control or the associated wiring. The control shows F1 and E2 in turns, then locks out oven operation. You might notice the oven did not warm up and the clock was replaced by the flashing code. The message is general, so the board and its connections both need a proper look.

Common causes of F1 E2

The oven control has a failing circuit
A damaged or loose wire or connector near the control

✓ One safe check you can try

1. Press Cancel and give it a few seconds. 2. Flip the range breaker off, wait sixty seconds, then flip it on. 3. Preheat to 350 degrees as a quick test. 4. If F1 E2 returns, stop and call us. 5. Keep the oven empty until the technician has had a chance to check it.

! Why to stop there

The control sits behind the panel with live voltage.
Resetting again and again does not fix a circuit that is failing.
A technician needs to rule out the wiring first, and that takes tools.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Feature Not AvailableJennAir Range Message "Feature Not Available": Try Again or Disable Power FEE6JennAir Range Code FEE6: Main cavity bake element FEE7JennAir Range Code FEE7: Main cavity broil element Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Range Display "12:00" or "Power Loss": Set the Clock After an Outage Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface

F1 E2F1 E2 questions

Is F1 E2 serious?

It is a control-level code, so treat it as a real repair. The oven is stopped for protection, and the problem will not go away by itself if the board or wiring is failing.

What is the difference between F1 E1 and F1 E2?

Both point to the oven control or its wiring. The second part is the control's detail, and we use it with testing on site to pinpoint what to fix.

How soon can you come for F1 E2?

We schedule Houston visits in 3-hour windows. Tell us the model and code, and we confirm a time. Repairs include a written price first and a 30-day workmanship warranty.