JennAir Older Range Code F1-H: Temperature sensor family

What F1-H means

Another entry in the older hyphenated set used by ranges like the JDR8895AAS, F1-H shares its description with F1-1, F1-2 and F1-L: there may be a problem with the oven temperature sensor, the control, or the associated wiring. The letter does not change what you should do. The oven loses its temperature reading and stops the cycle. Nothing else on the display changes.

Common causes of F1-H

Oven temperature sensor with a drifting reading
Sensor connector with poor contact
Control board unable to read the sensor

✓ One safe check you can try

1. Cancel the cycle and let the oven cool. 2. Reset power at the breaker after waiting a minute. 3. Run a quick 350 degree bake. 4. If F1-H comes back, leave the oven unused. Use the cooktop if it works normally, and call us for the oven.

! Why to stop there

Sensor, control and wiring give the same display, so testing is the only reliable path.
An oven that heats without a correct reading can burn food or overheat.
You get a written price before work, with 30 days of workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

FC E9JennAir Range Wi-Fi Power Module Reported Again (FC E9) Feature Not AvailableJennAir Range Message "Feature Not Available": Try Again or Disable Power FEE6JennAir Range Code FEE6: Main cavity bake element FEE7JennAir Range Code FEE7: Main cavity broil element Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Range Display "12:00" or "Power Loss": Set the Clock After an Outage Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up

F1-HF1-H questions

Is F1-H different from F1-L?

The official descriptions are the same, so we check the sensor circuit for both. The letter is just a variation within the family, and it does not change the repair or the order of our tests.

Will the oven heat at all with F1-H?

Usually it stops heating, because the control will not run without a temperature reading. The cooktop is normally unaffected, so many owners can wait for a scheduled visit and keep using the burners meanwhile.

How soon should I book?

Within a few days is reasonable, since the cooktop usually keeps working. Book sooner if the oven is your main cooking tool, and we will give you the price in writing before any work starts.