JennAir Range Code FEE7: Main cavity broil element

What FEE7 means

On JennAir electric, gas and dual-fuel ranges such as the JES1750FS and JDS1750ML, FEE7 says there may be a problem with the main cavity broil element or the associated wiring. The control tries to energize the broil element at the top of the oven and cannot confirm that it did. Broiling fails and the display shows FEE7. Surface cooking is unaffected.

Common causes of FEE7

Broil element open or burned through
Loose or scorched terminal wiring
Relay or harness problem feeding the broil element

✓ One safe check you can try

1. Press Cancel and wait for the oven to cool fully. 2. Look at the broil element at the top of the cavity for a break or blistered spot. 3. Cut power at the breaker for a minute and restore it. 4. Try broil for a few minutes. If it doesn't glow, call us.

! Why to stop there

Broil elements run hot and their terminals can fail quietly.
A wiring burn can spread if the range keeps being used.
Our price is in writing first and repairs have a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

FC E9JennAir Range Wi-Fi Power Module Reported Again (FC E9) Feature Not AvailableJennAir Range Message "Feature Not Available": Try Again or Disable Power FEE6JennAir Range Code FEE6: Main cavity bake element Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Range Display "12:00" or "Power Loss": Set the Clock After an Outage Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface

FEE7FEE7 questions

Can I still bake with FEE7?

Often yes, since the code names the broil side only, but the control may stop any cycle that triggers it. Try a plain bake, and if it runs, you can still cook while you wait.

Is a visible crack a sure sign?

A break or blister is a strong hint, though terminals and wiring can fail without any visible damage. A clean-looking element does not rule out the broil circuit.

How is FEE7 different from FEE6?

FEE6 is the bake element along the bottom of the oven and FEE7 is the broil element at the top, so each code sends us to a different heater and its own wiring.