Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent JennAir specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 766-5788 Request a Technician
Error code · Range

JennAir Range Message “Press Cancel to Reset”: Clear the Alert

On JennAir electric, gas and dual-fuel ranges with electronic oven control, such as the JES1750FS or JIS1450DS, Press Cancel to Reset appears when a problem or error has been detected. Press the Cancel button or pad…

Medium · inspection needed
Request a Technician(713) 766-5788
Code
Press Cancel to Reset
Appliance
Range
Brand
JennAir
Warranty
30-day workmanship

What Press Cancel to Reset means

On JennAir electric, gas and dual-fuel ranges with electronic oven control, such as the JES1750FS or JIS1450DS, Press Cancel to Reset appears when a problem or error has been detected. Press the Cancel button or pad to reset. If Call Service is displayed after pressing Cancel, reset power to the product. The oven may not continue its cycle until you clear the message.

Common causes of Press Cancel to Reset

  • A problem or error was detected during use
  • A momentary control glitch that Cancel clears
  • A persistent problem if Call Service follows
✓ One safe check you can try

1. Press the Cancel pad once. 2. If the message clears, restart your cycle. 3. If Call Service shows, turn the range's breaker off for a minute and back on. 4. If the message or Call Service returns, stop using the oven and call us.

! Why to stop there
  • The message is the first step, and Cancel is free.
  • If Call Service persists after a power reset, a technician must read the stored code.
  • We explain what we find and quote in writing.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Probe or Insert ProbeJennAir Range Display "Probe" or "Insert Probe": Meat Probe Not Detected PUSH or PSHJennAir Range Display "PUSH" or "PSH": Press Start to Begin Sabbath, Sab, 5Ab, or 5A7JennAir Range Display "Sabbath", "Sab", "5Ab" or "5A7": Sabbath Mode Is On FC E8Registration Error During App Setup: JennAir Range FC E8
Press Cancel to ResetPress Cancel to Reset questions
What does Cancel do here?

It resets the alert. If the issue was a one-time glitch, normal operation returns, and you can start your cycle again without any further steps.

What if Call Service appears next?

Reset power to the product at the breaker. If Call Service persists after that, the range needs a technician to read what the control stored.

Can I keep cooking after clearing it?

Yes, if it stays clear. If the message returns during later cooking, stop and call us, and we will give you a written price before any repair.

Book a visit

Still seeing Press Cancel to Reset?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 766-5788
☎ Call the desk ▤ Request a Technician