JennAir Range Code 1c8c: Control or wiring problem message

What 1c8c means

The 1c8c code appears on JennAir electric, gas and dual-fuel ranges, including models like the JDRP548W, when the electronic oven control or its wiring has a problem. It is a lettered variation of the 1c8 family shown above. Expect the oven to stop heating while the display holds the code, and expect it to come back if power is cycled without a repair.

Common causes of 1c8c

The oven control has a failure that the range cannot self-correct
A loose or damaged wire between the control and other parts of the range

✓ One safe check you can try

1. Clear the display with the Cancel pad. 2. Flip the dedicated breaker off for about a minute and then on again. 3. Try one short Bake to learn whether the oven heats. 4. If 1c8c comes back, do not keep trying. Call us. 5. Please do not slide the range out to reach wiring, since that can strain the gas line or power cord.

! Why to stop there

Moving a heavy range to reach wiring can tear a gas line or damage the floor.
Resets hide the problem for a day or two and then it returns, usually at a bad time.
Control boards are costly, and a wiring cause must be ruled out first.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert Probe or Insert ProbeJennAir Range Display "Probe" or "Insert Probe": Meat Probe Not Detected PUSH or PSHJennAir Range Display "PUSH" or "PSH": Press Start to Begin

1c8c1c8c questions

What does the c at the end of 1c8c mean?

It is simply part of the code as the control displays it. 1c8c carries the same meaning as 1c81 and 1c82: the oven control or its wiring.

Can a power reset clear 1c8c for good?

Only if the cause was a one-time electrical glitch. A true control or wiring problem comes back, usually within hours or the next time the oven is used.

How do I schedule a 1c8c repair?

Call us, describe the model and what the display shows, and we book a visit window. You get a written price before work begins and a 30-day workmanship warranty afterward.