JennAir Range Code 3d41: Check probe receptacle seating

What 3d41 means

On JennAir ranges with an oven meat probe, such as the JDRP548W or JES1750FS, 3d41 asks you to verify the probe is securely inserted in the meat probe receptacle. The location varies by model. It is the third entry of this probe family, after 3d31 and 3d32, and it appears when the control cannot read the probe. Normal timed baking is not the part that is affected.

Common causes of 3d41

Probe not fully inserted
A damaged probe
A receptacle connection that no longer makes good contact

✓ One safe check you can try

1. Let the oven cool. 2. Unplug the probe and inspect the metal plug end. 3. Wipe it dry, then seat it firmly in the receptacle. 4. Press Cancel and start the probe cycle again. 5. If 3d41 keeps showing, stop and call us.

! Why to stop there

A hot oven is a poor place to fiddle with a plug.
If the probe itself is bad, using it again will repeat the code.
Any receptacle repair needs proper tools and a cool, safe oven.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert Probe or Insert ProbeJennAir Range Display "Probe" or "Insert Probe": Meat Probe Not Detected PUSH or PSHJennAir Range Display "PUSH" or "PSH": Press Start to Begin Sabbath, Sab, 5Ab, or 5A7JennAir Range Display "Sabbath", "Sab", "5Ab" or "5A7": Sabbath Mode Is On

3d413d41 questions

Will 3d41 stop all baking?

Normally only probe cooking is affected. Press Cancel and set a normal timed Bake if you need to. If the code still blocks the oven, call us.

Can I buy a new probe myself?

A probe made for your model is a fair first try if yours is worn. If the receptacle is the cause, the new probe will give the same code and we should check it.

How do I know the probe is seated?

Push until you feel it stop and cannot pull it out by light tugging. The plug should sit flush. If it does and the code stays, the connection itself needs a look.