JennAir Range Code 4d12: Door lock signal not confirmed

What 4d12 means

JennAir ranges such as the JIS1450DS or JDS1750ML show 4d12 when the oven door latch assembly, the door switch, or the associated wiring may have a problem. It reads just like 4d11 on the owner's side. The oven door may feel normal, yet the control will not accept the signal that tells it the door is shut. The oven door may look and feel normal while this is showing.

Common causes of 4d12

The latch assembly is worn or jammed
A door switch fails to register the closed door
Wiring to the latch is open or loose

✓ One safe check you can try

1. Wait for the oven to cool before touching the door. 2. Close the door slowly and see whether anything is caught in the gap. 3. Wipe the door frame edge with a dry cloth. 4. Press Cancel and reset the range at the breaker. 5. If 4d12 comes back, call us.

! Why to stop there

The latch works under heat, and removing the door trim is awkward and unsafe.
Wiring problems cannot be seen from the front.
Clean cycles rely on the lock, so it needs a proper repair.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Sabbath, Sab, 5Ab, or 5A7JennAir Range Display "Sabbath", "Sab", "5Ab" or "5A7": Sabbath Mode Is On FC E8Registration Error During App Setup: JennAir Range FC E8 FC E9JennAir Range Wi-Fi Power Module Reported Again (FC E9) Feature Not AvailableJennAir Range Message "Feature Not Available": Try Again or Disable Power FEE6JennAir Range Code FEE6: Main cavity bake element FEE7JennAir Range Code FEE7: Main cavity broil element Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Range Display "12:00" or "Power Loss": Set the Clock After an Outage Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong

4d124d12 questions

Is 4d12 a lock or a switch problem?

The official meaning covers the latch assembly, the door switch and the wiring. Which one has failed is something our technician finds by testing, not by looking from outside.

Will baking work with 4d12 shown?

Probably not. Without the door signal, the control normally keeps heating off. Resetting may clear the code briefly, but a real latch or switch problem returns.

What does a visit cost?

We tell you the price in writing after the inspection and before any work starts. If you approve, the repair comes with a 30-day workmanship warranty.