JennAir Range Code 4d41: Cooling fan spinning too fast

What 4d41 means

On JennAir electric, gas and dual-fuel ranges such as the JDRP548W or JES1750FS, 4d41 means the oven cooling fan speed is too high. The listed possibilities are an airflow restriction, the oven cooling fan, or its wiring. Unlike the 4d2 pair, this one is about speed above normal. You may hear a louder fan, and the oven may stop heating.

Common causes of 4d41

An airflow restriction affecting fan speed
The oven cooling fan runs faster than it should
Wiring to the fan is loose or damaged

✓ One safe check you can try

1. Let the range cool. 2. Make sure the vents are clear and nothing is stored against the range. 3. Press Cancel. 4. Flip the breaker off for a minute and on again. 5. If 4d41 comes back, stop using the oven and call us. A louder fan is worth describing when you call.

! Why to stop there

Over-speed in a fan can signal a wiring or control problem, not only the fan.
Fan access means taking panels off a hot, live range.
Repeated resets can hide how often the fan misbehaves.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert Probe or Insert ProbeJennAir Range Display "Probe" or "Insert Probe": Meat Probe Not Detected PUSH or PSHJennAir Range Display "PUSH" or "PSH": Press Start to Begin Sabbath, Sab, 5Ab, or 5A7JennAir Range Display "Sabbath", "Sab", "5Ab" or "5A7": Sabbath Mode Is On FC E8Registration Error During App Setup: JennAir Range FC E8 FC E9JennAir Range Wi-Fi Power Module Reported Again (FC E9) Feature Not AvailableJennAir Range Message "Feature Not Available": Try Again or Disable Power

4d414d41 questions

How can a fan be too fast?

The control compares the fan's actual speed with what it expects. If the reading is higher than expected, it reports 4d41. Airflow changes, the fan or its wiring can all cause that.

Is 4d41 dangerous?

The oven normally stops heating, which is the safe response. We still recommend a visit, because the fan protects the range's electronics when you cook.

Do you replace fans on JennAir ranges?

Yes. We diagnose first, then replace the fan if it is the cause. You get the price in writing, and the repair carries a 30-day workmanship warranty.