JennAir Range Code 4d51: Door latch circuit message

What 4d51 means

Code 4d51 appears on JennAir electric, gas and dual-fuel ranges, for instance the JDRP548W or JES1750FS, when the oven door latch assembly, the door switch or the wiring may have a problem. After a recent clean cycle you might notice the door will not unlock, or the oven refuses to start a new cycle. The code can also appear after a cleaning cycle if the latch did not release.

Common causes of 4d51

The oven door latch assembly cannot move to the right position
The door switch is worn or misaligned
Wiring in the latch circuit is damaged

✓ One safe check you can try

1. Give the oven plenty of time to cool, since a hot oven may keep the door locked. 2. Try the door gently, never by force. 3. Close it and press Cancel. 4. Cut power at the breaker for a minute. 5. If 4d51 is still shown, call us.

! Why to stop there

A door stuck in its lock should not be pried.
Wiring in the latch circuit is not for owners to touch.
The latch is a safety part; it must work before you clean or bake.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert Probe or Insert ProbeJennAir Range Display "Probe" or "Insert Probe": Meat Probe Not Detected PUSH or PSHJennAir Range Display "PUSH" or "PSH": Press Start to Begin

4d514d51 questions

My door is stuck shut with 4d51. What now?

Wait for the oven to cool, then try the door once more without force. If it stays shut, call us and we will free it and fix the latch properly.

Does 4d51 differ from 4d11?

The wording is the same: latch assembly, door switch or wiring. The numbers tell the control which step of its door check caught the problem.

Can I use the stove top while the door is stuck?

On many ranges you can, but we cannot say for your model. If any burner or element behaves oddly, turn off the breaker and call us.