JennAir Range Code F0 E0: Control cannot identify the problem

What F0 E0 means

On JennAir electric, gas and dual-fuel ranges with electronic oven control, such as the JES1750FS and JDS1750ML, F0 E0 appears when the control detects a problem but cannot work out what kind. The cause may sit in a part of the oven control system, the electronic control itself, or the wiring between them. The oven stops the cycle and shows the code. On RISE and NOIR pro-style ranges the same F0E0 simply reports that a system check found no error.

Common causes of F0 E0

A control board that cannot classify an internal problem
A loose or damaged wire harness connection in the oven control system
A part elsewhere in the oven control system reporting something the board cannot interpret

✓ One safe check you can try

1. Press Cancel or turn the oven knob off. 2. Switch the range off at its breaker for one minute, then restore power. 3. Set the clock and start a short bake to see whether the code returns. 4. On a pro-style range with no cooking problem, note that F0E0 can be an all-clear message. A code that returns on a standard range needs a technician. Gas ranges: with any gas smell, leave the house and call the gas utility from outside.

! Why to stop there

Because the control cannot say what is wrong, the cause has to be found by testing the system, not by replacing one part and hoping.
Opening a range to chase wiring is unsafe for owners and can disturb gas connections.
We test first, quote in writing and back the repair with 30 days of workmanship coverage.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

FC E9JennAir Range Wi-Fi Power Module Reported Again (FC E9) Feature Not AvailableJennAir Range Message "Feature Not Available": Try Again or Disable Power FEE6JennAir Range Code FEE6: Main cavity bake element FEE7JennAir Range Code FEE7: Main cavity broil element Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Range Display "12:00" or "Power Loss": Set the Clock After an Outage Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up

F0 E0F0 E0 questions

Why does my pro-style range show F0E0 and still work?

On RISE and NOIR pro-style ranges that code reports that the system check came back clean. If the range cooks normally, it is information and not a breakdown.

Will a power reset clear it?

Sometimes a one-minute breaker reset clears a one-time glitch. If the code returns on a standard range, the control or its wiring needs testing, so book a visit.

Is F0 E0 the same as F0 on older ranges?

No. The older hyphenated and two-digit codes follow a different scheme. This page covers the F-and-E generation found on current slide-in, downdraft and pro-style ranges, so check your display wording against it.