JennAir Range Code F2 E2: Keypad or control problem

What F2 E2 means

On JennAir ranges that use two-part codes, including the JES1750FS and JIS1450DS, F2 E2 signals a possible problem with the user interface or keypad, the control, or the wiring connecting them. The F2 part moves the focus from the oven control to the touch panel. You will see the code, and some pads may stop responding. The message is general, so the pads, the board and the connections all need testing.

Common causes of F2 E2

The keypad or user interface has a problem
The control that reads the keypad is failing
A wiring connection between the two is open or damaged

✓ One safe check you can try

1. Wipe the panel with a dry soft cloth and press Cancel. 2. Take the range off power at the breaker for a minute, then restore it. 3. Touch one pad at a time to see whether the display answers. 4. If F2 E2 comes back, stop and call us. 5. Avoid spraying cleaner onto the controls.

! Why to stop there

Pressing pads hard or often can make a weak keypad worse.
The connection between the keypad and the control is out of sight.
A proper test tells whether the keypad or the board is to blame.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert Probe or Insert ProbeJennAir Range Display "Probe" or "Insert Probe": Meat Probe Not Detected PUSH or PSHJennAir Range Display "PUSH" or "PSH": Press Start to Begin Sabbath, Sab, 5Ab, or 5A7JennAir Range Display "Sabbath", "Sab", "5Ab" or "5A7": Sabbath Mode Is On FC E8Registration Error During App Setup: JennAir Range FC E8 FC E9JennAir Range Wi-Fi Power Module Reported Again (FC E9) Feature Not AvailableJennAir Range Message "Feature Not Available": Try Again or Disable Power

F2 E2F2 E2 questions

What does the F2 mean in F2 E2?

F2 moves the message toward the user interface and keypad, while F1 codes point mostly to the oven control. Both ends still need checking because the keypad depends on the control.

My pads respond sometimes. Is that normal?

No. A keypad that works only part of the time suggests a loose link or a failing pad. That matches the code and is worth a service visit.

How long does an F2 E2 repair take?

Most visits finish in one trip when the part is on the truck. You get a written price first, and the work carries our 30-day workmanship warranty.