Keypad or User Interface Trouble Behind JennAir Range Code F2 E5

What F2 E5 means

On JennAir electric, gas and dual-fuel ranges with electronic oven control, such as the JES1750FS or JDS1750ML, F2 E5 points to the user interface or keypad, the control, or the wiring between them. The oven cannot trust what the touch panel is telling it, so it shows the code and may stop responding to the pads. You will see F2 E5 on the display, often with the oven refusing to start.

Common causes of F2 E5

The keypad or user interface is not sending a clean signal
The electronic control is not reading the interface
Wiring between the interface and the control is loose or damaged

✓ One safe check you can try

1. Turn the oven and cooktop controls off. 2. Switch the range's breaker off for one minute, then back on. 3. Wipe the control panel dry with a soft cloth in case moisture or grease is touching the pads. 4. If F2 E5 returns, stop using the oven and call us.

! Why to stop there

The code could come from the panel, the control or the wiring, and only a measured check tells them apart.
Panel and control boards are costly, and swapping the wrong one wastes money.
Opening the range means reaching wiring connected to line voltage, which should be left to a technician.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert Probe or Insert ProbeJennAir Range Display "Probe" or "Insert Probe": Meat Probe Not Detected PUSH or PSHJennAir Range Display "PUSH" or "PSH": Press Start to Begin

F2 E5F2 E5 questions

What part does F2 E5 point to?

It points to the user interface or keypad, the control, or their wiring. It does not name one part, so a technician tests the signal path to find which one is responsible.

Can I keep baking if the pads still work?

It is better not to. The oven has flagged a problem in how it reads its own controls, so settings may not be trusted. Switch it off and call us.

Will a breaker reset clear it?

Sometimes a reset clears a one-time glitch. If F2 E5 comes back, the cause is still present. We then give you a written price before we start any repair.