JennAir Range Code F6 E5: User interface or wiring

What F6 E5 means

On JennAir electric, gas and dual-fuel ranges such as the JES1750FS and JDS1750ML, F6 E5 points to the user interface, the front control panel, or the wiring attached to it. The oven may still be capable of heating, but the panel cannot be trusted, so the display posts F6 E5 and may ignore keypresses. Cooktop burners generally continue to work.

Common causes of F6 E5

User interface panel with a failing part
Ribbon cable or connector between panel and control
Moisture or heat damage behind the panel

✓ One safe check you can try

1. Press Cancel and wipe the panel with a barely damp cloth. 2. Dry it completely. 3. Turn the range off at the breaker for a minute and back on. 4. Press each key once and see if the display responds. If it doesn't, leave the oven off and call us.

! Why to stop there

Panel failures are common after spills, and the damage may be hidden.
A replacement panel only helps if the wiring is sound.
We quote in writing first and cover the repair for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert Probe or Insert ProbeJennAir Range Display "Probe" or "Insert Probe": Meat Probe Not Detected PUSH or PSHJennAir Range Display "PUSH" or "PSH": Press Start to Begin

F6 E5F6 E5 questions

Why is my display blank with F6 E5?

The panel may be failing to power up or to talk to the control. Reset power at the breaker first, and if the display stays dark or the code returns, the interface and its wiring need testing.

Can I still cook?

If the panel does not respond, you cannot set a cycle safely. Use the breaker to turn off anything running, and leave the oven unused until we have checked the interface and its ribbon wiring.

Is F6 E5 different from F2 E0?

Both involve the interface, but they come from different code groups on different range generations. We test the panel, its ribbon wiring and the control for either code.