JennAir Range F6 Means Oven Control Trouble

What F6 means

On JennAir electric, gas and dual-fuel ranges with electronic oven control, such as the JES1750FS or JDS1750ML, plain F6 says the oven control, or the wiring around it, may have a problem. The control is the brain of the oven, so when it flags itself the oven usually stops. You will see F6 on the display and the oven may ignore your settings.

Common causes of F6

The oven control itself is reporting an internal problem
Wiring to the control is loose or damaged

✓ One safe check you can try

1. Turn every control to off. 2. Cut power at the range's breaker for one minute and restore it. 3. Wait for the display to come back and check whether F6 is gone. 4. If F6 shows again, stop using the oven and call us.

! Why to stop there

The control is the most expensive board in the range, so we confirm it is really the cause before replacing it.
A wiring issue can look identical to a control problem.
We test the control and the wiring, then give a written price.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Feature Not AvailableJennAir Range Message "Feature Not Available": Try Again or Disable Power FEE6JennAir Range Code FEE6: Main cavity bake element FEE7JennAir Range Code FEE7: Main cavity broil element Flashing Time, Clock, 12:00, Power Loss or Enter TimeJennAir Range Display "12:00" or "Power Loss": Set the Clock After an Outage Indicator FlashingJennAir Range Cooktop Indicator Flashing: Keys Pressed or Controls Set Wrong Indicator or Hot Light OnJennAir Range Hot Light On: A Control or Element Is Still Hot Lo or PreJennAir Range Display "Lo" or "Pre": The Oven Is Warming Up LockJennAir Range Cooktop Control Lock: Unlock to Use the Surface

F6F6 questions

What does F6 mean in simple terms?

The oven control, or the wiring around it, may have a problem. It is the broadest of the F6 family, so a technician checks the control and its connections together.

Will a breaker reset fix it?

It can clear a one-time glitch. If F6 returns, the cause is still present and the control or wiring needs a proper test before anyone orders a part.

Is it okay to keep using the cooktop?

If the cooktop responds normally it may still work, but when the whole display is affected it is safer to turn the range off and call us for a check.