JennAir Range Display FC E2 Means the Wi-Fi Link to the Router Failed

What FC E2 means

FC E2 on JennAir ranges with electronic oven control and Wi-Fi, such as the JIS1450DS or JDS1750ML, shares its official meaning with FC E1: the range could not connect to the router. A time-out, poor signal, a failed router, the range's Wi-Fi module, or the associated wiring can be behind it. You will see FC E2, and the connected features stay offline while normal cooking continues.

Common causes of FC E2

A connection time-out between the range and the router
A weak signal at the range's location
A failed or misbehaving router
The Wi-Fi module in the range or its wiring

✓ One safe check you can try

1. Shut off the range at the breaker for one full minute, then restore power. 2. Give it another minute and see whether FC E2 shows again. 3. Power-cycle the router and confirm your phone connects to it. 4. Try pairing the range again, ideally with the router close by.

! Why to stop there

The home network is the most common culprit, and fixing it costs nothing.
Modules and wiring should be tested, not guessed.
We tell you our price before starting.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Locked, Lock or LocJennAir Range Oven Display "Locked", "Lock" or "Loc": Unlock Controls and Door Press Cancel to ResetJennAir Range Message "Press Cancel to Reset": Clear the Alert Probe or Insert ProbeJennAir Range Display "Probe" or "Insert Probe": Meat Probe Not Detected PUSH or PSHJennAir Range Display "PUSH" or "PSH": Press Start to Begin Sabbath, Sab, 5Ab, or 5A7JennAir Range Display "Sabbath", "Sab", "5Ab" or "5A7": Sabbath Mode Is On FC E8Registration Error During App Setup: JennAir Range FC E8 FC E9JennAir Range Wi-Fi Power Module Reported Again (FC E9) Feature Not AvailableJennAir Range Message "Feature Not Available": Try Again or Disable Power

FC E2FC E2 questions

How does FC E2 differ from FC E1?

The wording is the same. The last digit lets a technician see which connection check ended in error, so give us the full code if you call and we will note it.

Does it affect baking?

No. The oven and cooktop work as usual. Only the connected functions are down while the code is showing, and normal cooking is not interrupted at all.

Should I buy a new router?

Not yet. Restart the router first and check another device. If the network is fine and FC E2 repeats, call us and we will look at the range itself.